Customer satisfaction is a major goal in Six Sigma. Therefore the product that comes off the line must be free of defects.
What is Six Sigma and How Does it Apply to Automation
Leak Check Gripper Retrofit
Setpoint was asked to retrofit a two up pick and place to a four up pick and place on a leak check machine. This would be no problem, but due to space constraints we were…
Prototype Tooling for Scara Robot
The scara robot Setpoint will be integrating into station 1 on the new MGG machine has a spindle (z axis) with an internal diameter of Ø11mm. All cables, tubes, and wires routed to this tooling…